ملحقات

710mm long monitor/notebook arm. Three articulation points and extra arm length assists with larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 8kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

The AWM-A71 monitor arm is a part of the Atdec modular family. The arm is typically used in set & forget multi-display configurations or when the extra long focal distance adjustment is required. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

Atdec 710mm Monitor Arm White

Atdec AWM-P75G-B Atdec 750mm post AWM-P75G-B

The AWM-P75G is a part of the Atdec modular family. This post is typically used when mounting displays in two rows or when extra height is required for single, dual or triple configurations. To make the display alignment easier the post features guide marks which serve as a reference for setting the height of each arm. This is particularly useful in projects with multiple installations.

750mm high post that can support up to two rows of displays. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

750mm high post that can support up to two rows of displays. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

The AC-AP-2020 adaptor plate is designed for monitors with VESA mounting hole configurations larger than the common 50 x 50mm, 75 x 75mm or 100 x 100mm. It enables a monitor with a mounting hole pattern up to 200x200 VESA mounting hole pattern to be attached to mounts with smaller VESA patterns. Suitable for screens with VESA hole patterns of 50x50, 75x75, 100x100, 100x150, 120x180, 200x100, and 200x200. Fasteners supplied.

Notebook tray accessory. Ventilated non-slip tray recommended for laptops up to 18 ". Can be easily attached to any modular AWM arm using quick release attachment mechanism.

The AD-30100-WF securely supports displays weighing up to 30kg and sits just 14.5mm from the wall. This space-saving design is ideal for small displays where screen movement is not required. The two-piece design and built-in bubble level make the installation process quick and easy. The screen is protected against theft with two security screws.

The ADBS-1-4FBB is a pre-configured mounting solution for single freestanding floor display. The mounting brackets support displays up to 110lb and are attached to an 18.9 " horizontal mounting rail. Ideal for limited space.

Atdec SD-POS-HA Atdec Adjustable Desk Monitor Mount SD-POS-HA

Ideal for single row, multi-screen installations, these brackets are designed to mount small to medium sized screens in a fixed position along modular horizontal mounting rails. The universal design is compatible with a variety of different screens and allows them to be mounted in either landscape or portrait orientations. Levelling screws on each bracket provides post installation height adjustment and a mounted depth of 48mm from the wall allows easy access for cables and connectors.

Ideal for assembling video walls and other multi-screen applications, these brackets are designed to mount medium to large sized screens on to modular horizontal mounting rails. The universal design is compatible with all video wall screens and the modular design allows an almost endless number of configurations to be assembled, in both landscape or portrait orientations. Tool-less 8 point micro-adjustment allows perfect alignment of displays and a mounted depth of 114mm from the wall allows easy access for cables and connectors.

Set of three Cable Manager clips.Required when ADM-CC is cut into shorter lengths.All mounting hardware included.

Designed to fit ADM-R mounting rails to ADM-P support posts, the ADM-JP is a joining plate which is needed to assemble modular freestanding, mobile or bolt-down video wall solutions. The plate is fitted quickly and easily using the provided sliding nuts and countersunk screws, which allow the mounted rail to be positioned anywhere along the length of the post. A row height spacer (BT8390-SP) is also available (separately) to help position multiple rails when installing video walls, without needing to measure out the position of each ADM-JP.

ADM-R1750 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R1750 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs

The ADM-R500 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R500 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

ADM-R700 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R700 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length.

The ADM-WF2 is a bracket designed to fix ADM-R mounting rails onto walls or poles, for the installation of video walls and other multi-screen configurations. The sturdy 5mm thick plate is designed for installations using micro-adjustment, pop-out or XL brackets from the modular range.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

Atdec Arm Channel Clamp White

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-ND13 is a notebook and display spring arm combination attached to a 135mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-D40 is a combination of two monitor spring arms attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-D40 is a combination of two monitor spring arms attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec AWMS-2-4640F-B Atdec AWM Dual monitor arm solution AWMS-2-4640F-B

Atdec AWMS-2-4640F-S Atdec AWM Dual monitor arm solution AWMS-2-4640F-S

The AWMS-4-4675 is a quad 460mm arm combination attached to a 750mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

The AWMS-4640 is a single 460mm monitor arm attached to a 400mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-4640 is a single 460mm monitor arm attached to a 400mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-D40 is a single monitor spring arm attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arm incorporates a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec AWMS-4640F-B Atdec AWM Single monitor arm solution AWMS-4640F-B