Atdec

60mm wall channel.

The AWMS-6-13717 is a six arm combination attached to a 750mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life. Displays up to 24 ". The six display arms can be installed in any of the four channels of the 750mm post. Extended arm reach provides support for a range of display sizes and greater cockpit angles. Perfect for screen real estate demanding applications.

The SYSTEMA modular design allows the user to create a custom solution by combining monitor arms and notebook trays with desk posts, wall mounts and other accessories to create a limitless variety of configurations. Combine any of the following assemblies to create the ultimate mounting solution for any environment.

The ADBS-1-4FBB is a pre-configured mounting solution for single freestanding floor display. The mounting brackets support displays up to 110lb and are attached to an 18.9 " horizontal mounting rail. Ideal for limited space.

The AWMS-4-4675 is a quad 460mm arm combination attached to a 750mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The ADBS-1X2-4FCF is a pre-configured mounting solution for floor-to-ceiling display. The mounting brackets support displays up to 50kg and are attached to two 0.48m horizontal mounting rail. Ideal for limited space.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

The AWMS-RHXB dual crossbar display desk mount is designed to support two displays with a single monitor arm. Its spring-assisted design with three points of articulation enables effortless simultaneous adjustment of both monitors from a seated position. The crossbar features a horizontal rail which enables display position adjustment in both directions, to accommodate monitors of different sizes and landscape/portrait configurations.

Designed to make video wall installations as quick and simple as possible, this modular video wall mount can be used to create unlimited video wall configurations in both landscape and portrait format. The pop-out system enables quick and easy access to the rear of mounted screens for servicing.

The SYSTEMA modular design allows the user to create a custom solution by combining monitor arms and notebook trays with desk posts, wall mounts and other accessories to create a limitless variety of configurations. Combine any of the following assemblies to create the ultimate mounting solution for any environment.

The AWMS-2-ND13 is a notebook and display spring arm combination attached to a 135mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-D40 is a combination of two monitor spring arms attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-D40 is a combination of two monitor spring arms attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arms incorporate a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec TH-TVCH Atdec Heavy duty mobile TV cart TH-TVCH

The AWMS-2-LTH75 is a dual monitor mount attached to a 750mm post. Bigger, heavier screens (up to 14kg) including curved monitors and all-in-one PCs are easily accommodated with this brilliantly designed solution.

The AWMS-2-LTH75 is a dual monitor mount attached to a 750mm post. Bigger, heavier screens (up to 14kg) including curved monitors and all-in-one PCs are easily accommodated with this brilliantly designed solution.

The AD-TVC mobile cart is designed for presentation and education applications. It supports a wide range of medium to heavy weight displays (up to 50kg) and comes with a height adjustable shelf for use with modern media devices. Mobile TV carts allow displays to be maneuvered between rooms quickly and easily, helping to cut down on costs by reducing the need to buy multiple displays.

Supports displays up to 70" Universal VESA up to 600 x 400 Landscape to Portrait display rotation 5° upward tilt for comfortable touch-screen...

ADM-P1800 vertical support posts are the backbone of most modular trolley or floor stand installations. Made from aluminium, the post is sturdy yet lightweight and is designed to support single or multiple horizontal mounting rails. A modern design aesthetic and integrated cable management gives a high-end finish to any install in which they are used. Available in 1.8m and 0.6m lengths, posts can also be joined together using extension kits (available separately) to create video wall and other installations at heights of up to 4.2m.

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

The TH-3070-CT is a medium to heavy weight TV ceiling mount designed to offer the ultimate in versatility and universal compatibility. It is the perfect...

The ADBS-2X1-12TC is a pre-configured mounting solution for digital menu boards. The mounting brackets support displays up to 25kg and are attached to a 1.25m horizontal mounting rail, with the added convenience of tilting mechanism.

Atdec VFS-Q Atdec Quad monitor desk mount VFS-Q

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec TH-3070-CTL Atdec Ceilling Large display TV Mount TH-3070-CTL

The TH-3070-CT is a medium to heavy weight TV ceiling mount designed to offer the ultimate in versatility and universal compatibility. It is the perfect...

The TH-3070-CT is a medium to heavy weight TV ceiling mount designed to offer the ultimate in versatility and universal compatibility. It is the perfect...

The AWMS-D40 is a single monitor spring arm attached to a 400mm post. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and is the ideal solution for Activity Based Workplaces. The arm incorporates a spring tension visual gauge indicator to save time and effort with multiple installations. The flexibility extends to the choice of desk fixing options (not included). Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec ADM-FS Atdec Freestanding floor base ADM-FS

Designed to create freestanding, flat screen floor stands, the ADM-FS is a robust steel base that works in conjunction with ADM-P posts to create stylish display mounting solutions with a high-end aesthetic. The heavy duty construction allows for single or multi-screen setups without the need to permanently fix to the floor. Adjustable levelling feet are included to accommodate uneven floor surfaces.

The Telehook TH-3060-UF is a wall mounting solution for the latest generation of consumer LED, LCD and Plasma displays. If you have a 32 " or larger flat screen TV that you wish to mount flush to a wall then this may be the product for you. The slim profile provides a sleek finish while quality construction ensures a lifetime of worry-free operation. Universal VESA support ensures compatibility with a large number of displays. A mounting plate affixes directly to the wall while brackets attach to the display using screws included in the pack. After cabling the display is simply lifted and clicked into place.

Atdec ADM-R2000 Atdec 2000mm Wall Mounting Rail ADM-R2000

Gas-strut mechanism for effortless movement Counterbalanced adjustment for heavy screens Integrated 180° rotation limiter to prevent interference with...

Gas-strut mechanism for effortless movement Counterbalanced adjustment for heavy screens Integrated 180° rotation limiter to prevent interference with...

Gas-strut mechanism for effortless movement Counterbalanced adjustment for heavy screens Integrated 180° rotation limiter to prevent interference with...

The AWM-AD monitor arm is a mounting component in the AWM modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted.For direct to desk mounting use AWM-LB base (sold separately). For post configurations use AWM-LC clamp (sold separately).

Atdec VFS-DH Atdec Dual-Monitor Stand VFS-DH

Designed to support two displays up to 8kg(17.5lbs) this desk mount is featuring a 440mm pole with two articulated display arms . The arms can be independently set to the designed height to ensure perfect display alignment be it identical or different size monitors. Easy glare control and focal distance adjustments are possible thanks to three points of articulation on each arm, tilt and pan functions. The rotating function at the VESA head allows applications in either landscape or portrait orientation. The displays can be set in a back-to-back or side-by-side configuration (up to 27 " monitors in a side-by-side landscape orientation). Generous cable management

Ideal for web conferencing equipment and content distribution devices Generous 273 x 420mm mounting area Extended sliding distance Removable...

Atdec AF-AT-D-P Atdec Dual Arm Desktop Monitor Mount AF-AT-D-P

The AF-AT-D is designed specifically for users who require a dual monitor configuration and will revolutionize any workspace. Monitors can be set to ideal heights and ball bearing arm joints ensure smooth, long-life operation. Optimal display positions allow brilliant flexibility and quick release/attachment mechanisms make installation and monitor-swapping simple and easy. Advanced cable management ensures clean monitor and mount profiles for the ultimate style and function. This mount may be also used in a back-to-back configuration for single monitor applications when desk space is at a minimum.

ADM-R1750 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R1750 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs

Atdec TH-1040-CTL Atdec Ceiling Telescopic Long Pole Mount TH-1040-CTL

The AWMS-4640 is a single 460mm monitor arm attached to a 400mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

This POS Solution is comprised of a head assembly back to back on a 400mm post. Ideal for mounting two back-to-back POS screens, it has a max weight hold of 10kg per screen and includes cable clip, top cap, base cover plate, fixing ring and all hardware required for installation. Supports displays with 75/100 VESA.

Atdec VFS-DV Atdec Dual stack or single monitor desk mount VFS-DV

POS Solution articulated arm pin with VESA head assembly on 400mm post (incl all installation hardware for monitor, tilt and post installation, top cap, cover plate, fixing ring & cable clip).

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

The AWMS-4640 is a single 460mm monitor arm attached to a 400mm post. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

710mm long monitor/notebook arm. Three articulation points and extra arm length assists with larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 8kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

The AWM-A71 monitor arm is a part of the Atdec modular family. The arm is typically used in set & forget multi-display configurations or when the extra long focal distance adjustment is required. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

Atdec 710mm Monitor Arm White

The Atdec AWMS-46W35 is a single 460mm monitor arm attached to a 350mm wall channel. It offers an enhanced range of motion and height adjustability. Perfect for public display, point of sale (POS) and medical environments. Touch screen compatible. Upgrades: The display mounting head can be replaced with the Atdec notebook holder SNTB(sold separately). Extended wall channel height provides support for an additional display, notebook or tablet.

The Atdec AWMS-46W35 is a single 460mm monitor arm attached to a 350mm wall channel. It offers an enhanced range of motion and height adjustability. Perfect for public display, point of sale (POS) and medical environments. Touch screen compatible. Upgrades: The display mounting head can be replaced with the Atdec notebook holder SNTB(sold separately). Extended wall channel height provides support for an additional display, notebook or tablet.

The AF-AT-D is designed specifically for users who require a dual monitor configuration and will revolutionize any workspace. Monitors can be set to ideal heights and ball bearing arm joints ensure smooth, long-life operation. Optimal display positions allow brilliant flexibility and quick release/attachment mechanisms make installation and monitor-swapping simple and easy. Advanced cable management ensures clean monitor and mount profiles for the ultimate style and function. This mount may be also used in a back-to-back configuration for single monitor applications when desk space is at a minimum.

Atdec AWM-A71-S Atdec Monitor Mounting Arm AWM-A71-S

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

The TH-1040-CTS is a cutting edge ceiling mount offering superior display versatility, combined with enhanced safety features and hassle-free installation. The "donut " mounting head effortlessly rotates the screen through 360 degrees around the pole and to maximise display impact the VESA Ball Mount can infinitely adjust display position by 20 degrees in any direction. Display height is also customised with the telescopic pole adjustments. Installation is simple, with in-built safety features to prevent the unlikely event of the telescopic poles separating.

The TH-1040-CTSW is a cutting edge ceiling mount offering superior display versatility, combined with enhanced safety features and hassle-free installation. The "donut " mounting head effortlessly rotates the screen through 360 degrees around the pole and to maximise display impact the VESA Ball Mount can infinitely adjust display position by 20 degrees in any direction. Display height is also customised with the telescopic pole adjustments. Installation is simple, with in-built safety features to prevent the unlikely event of the telescopic poles separating.

Telehook Wall Universal Video Wall - Vertical Rail Set. 1 set of rails per display required, used in conjunction TH-VWP-050, 080, 100 or 160 wall plates (all sold seperately). Max weight 165kg per display. Vesa Support: Horizontal is unlimited, Vertical is 200-800mm Height Adjustment +/- 5mm.

Atdec SD-POS-HA Atdec Adjustable Desk Monitor Mount SD-POS-HA

Atdec TH-3070-UT Atdec Wall / Tilt Mount TH-3070-UT

SPACEDEC range 1150mm post "donut " style single display mount. Quick shift mechanism for easy height adjustment. Supports displays weighing up to 9kg. VESA 75x75mm & 100x100mm. Display height adjustment, tilt, pan, portrait to landscape rotation. Can be upgraded to support additional displays. All mounting hardware, bolt through, desk clamp mounting options included.

Telehook 10 "-40 " Full Motion Wall Mount

POS Solution 200mm arm pin with VESA head assembly on 400mm post (incl all installation hardware for monitor, tilt and post installation, top cap, cover plate, fixing ring & cable clip).

Atdec SD-DP-750 Atdec 750mm long pole LCD Mount SD-DP-750

This POS Pole is 90mm long and is designed with an angle stop, which enables rotation to 210 degrees. It comes with cable clip, top cap, base cover plate and all hardware required for installation. Compatible with 38mm attachments such as VEA display mounts and credit pard terminal plates. A durable steel structure ensures reliability in demanding retail environments.

460mm long monitor/notebook arm. Three articulation points assist with mounting larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

460mm long monitor/notebook arm. Three articulation points assist with mounting larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

Atdec 460mm Monitor Arm White

Ideal for assembling video walls and other multi-screen applications, these brackets are designed to mount medium to large sized screens on to modular horizontal mounting rails. The universal design is compatible with all video wall screens and the modular design allows an almost endless number of configurations to be assembled, in both landscape or portrait orientations. Tool-less 8 point micro-adjustment allows perfect alignment of displays and a mounted depth of 114mm from the wall allows easy access for cables and connectors.

The ADM-F is a freestanding floor mounting option for ADM-P1800 vertical posts. Levelling feet are supplied and 4 " braked castors (ADM-C) are available separately for mobile video wall applications.

POS Head assembly back to back (incl fixing ring/monitor & tilt hardware bit bag).

Monitor weight suspension up to 8kg. Articulated design with 3 pivot points for further reach Optional 360° pole rotation (can be limited to 180°)...

Monitor weight suspension up to 8kg Articulated design with 3 pivot points for further reach Optional 360° pole rotation (can be limited to 180°)...

Monitor weight suspension up to 8kg. Articulated design with 3 pivot points for further reach Optional 360° pole rotation (can be limited to 180°)...

The AF-AT-W is the ideal ergonomic and space-saving non-spring monitor wall mount for home or corporate offices. The AF-AT-W can also be used in educational or hospital institutions. This brilliantly designed and engineered mount delivers exceptional functionality including focal distance, display height settings, and viewing angle fine-tuning. Ball bearing arm joints ensure supple, effortless, long-life operation. Quick release/attachment display mechanism makes installation and swapping monitors an easy one-person job and cables are cleverly managed for a clean, stylish look.

The TH-TVCB-CM is a camera shelf accessory for the TH-TVCB mobile TV cart. It allows a professional grade teleconferencing camera to be securely positioned above your existing mobile cart. It helps to improve your teleconferencing experience by tidying up your excess cabling, offering a high range of movement and creating an all in one teleconferencing system. It features a high range of movement at all three pivot points, integrated cable management and 10 years warranty.

The AF-M is a premium, non-spring monitor arm for limited-space applications. The arm is elegant, polished aluminum that adds style, flair, and brilliant design to contemporary offices. The AF-M is exceptionally suited to mobile kiosks, check-in counters, and banking customer service areas. This monitor arm allows for screen sharing and generous tilt and pan for ideal viewing angles.

An ultra-slim and cost-effective solution for wall mounting small TVs that weigh up to 27kg. Providing a steam-lined finish that supports your screen just 46mm from the wall, the articulated arm has three pivot points that enable superior control over screen position to perfect image quality and enjoyment. This Telehook arm comes pre-assembled, for quick and easy installation, assisted by a quick attachment mechanism and integrated cable management. It supports a variety of VESA mounting hole configurations and comes with a 10 year warranty.

The Telehook TH-VWV is a bracket set (2 brackets per set) for use with the Telehook Universal Video Wall Mount. It is compatible with a universal range of video panels thanks to its unlimited width VESA mounting hole pattern (200mm to 400mm high). A complete solution can be configured via the use of a combination of 100cm (TH-VWP-100) or 160cm (TH-VWP-160) wall plates and additional bracket sets as required. The Telehook Universal Video Wall Mounting System is an industry leading modular, interchangeable and upgradeable product range that supports a wide variety of video wall configurations; from a modest 2x2 configuration all the way up to 12x12 and beyond.

POS Solution head assembly angled on 400mm post (incl all installation hardware for monitor, tilt and post installation, top cap, cover plate, fixing ring & cable clip).

Atdec TH-1040-VFL Atdec Ultra slim full motion TV Mount TH-1040-VFL

SPACEDEC range 750mm post "donut " style single display mount. Quick shift mechanism for easy height adjustment. Supports displays weighing up to 9kg. VESA 75x75mm & 100x100mm. Display height adjustment, tilt, pan, portrait to landscape rotation. Can be upgraded to support additional displays. All mounting hardware, bolt through, desk clamp mounting options included.

The Telehook TH-VWP-160 is a 160cm wall plate for use with the Telehook Universal Video Wall Mount. A complete solution can be configured via the use of a combination of bracket sets (TH-VWV), 100cm (TH-VWP-100) wall plates and 160cm (TH-VWP-160) wall plates. The Telehook Universal Video Wall Mounting System is an industry leading modular, interchangeable and upgradeable product range that supports a wide variety of video wall configurations; from a modest 2x2 configuration all the way up to 12x12 and beyond. It incorporates a range of high end features that offer high security, time saving and easy installation, and clever adjustment options.

Atdec APAS-HTML-F150 Atdec POS Freestanding POS display mount APAS-HTML-F150

Supports up to 18 notebooks (8kg) 360° pole rotation Adjustable tilt (10-35°) and pan (90°) Maximum arm reach 380mm 10-year warranty

Supports up to 18 notebooks (8kg) 360° pole rotation Adjustable tilt (10-35°) and pan (90°) Maximum arm reach 380mm 10-year warranty

Supports up to 18 notebooks (8kg) 360° pole rotation Adjustable tilt (10-35°) and pan (90°) Maximum arm reach 380mm 10-year warranty

POS Articulated arm 180 + 180mm length (incl fixing ring & velcro cable management) Compatible with 38mm vesa holders or angle stop mounts - pinpad "Chip & Pin " or printer tray accessories.

This POS Solution is comprised of a head assembly top mount on a 300mm post. Ideal for mounting a single POS screen in a fixed position on top of the pole, it has a max weight hold of 10kg and includes cable clip, top cap, base cover plate, fixing ring and all hardware required for installation. Supports displays with 75/100 VESA