Mount Accessories

Atdec TH-TVCB-CM Atdec Camera Shelf for TH-TVCB Mobile Cart (TH-TVCB-CM)

Atdec AWMS-4640F-B Atdec AWM Single monitor arm solution AWMS-4640F-B

Atdec ADM-BV400T Atdec VESA 400 tilting brackets (set of two) ADM-BV400T

Atdec AWM-P75G-B Atdec 750mm post AWM-P75G-B

Use the HP Quick Release Bracket 2 to attach your HP Desktop Mini to an HP display and a variety of stands, arms or wall mounts. The failsafe "Sure-Lock " mechanism snaps the PC securely in place, and can be further secured with a theft-deterrent security screw.

Wrap your HP Desktop Mini PC in the HP Desktop Mini Security/Dual VESA Sleeve v3 to securely mount it with or without an Expansion Module behind your display, position the solution on a wall, and lock it down with the integrated security bracket and optional HP Ultra-Slim Cable Lock.

For use with the 135mm, 460mm and 750mm Posts

The AWM-FB bolt through mounting option is a part of the Atdec modular family. It offers flexibility in mounting position and when attachment to the edge of the desk is not possible. Suitable for desks up to 33mm.

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

The SMHS VESA display replacement head is a part of the Atdec modular family.

Atdec VESA Head Black

Atdec VESA Head Silver Quick release VESA head 75x75 100x100

The AWM-W6 is a part of the Atdec modular family. This is a wall mounting option for any AWM- arm.

The AC-AP-2020 adaptor plate is designed for monitors with VESA mounting hole configurations larger than the common 50 x 50mm, 75 x 75mm or 100 x 100mm. It enables a monitor with a mounting hole pattern up to 200x200 VESA mounting hole pattern to be attached to mounts with smaller VESA patterns. Suitable for screens with VESA hole patterns of 50x50, 75x75, 100x100, 100x150, 120x180, 200x100, and 200x200. Fasteners supplied.

This monitor stand combines the notebook, docking station and an external monitor in a single footprint on the desk for better space management. The lower shelf of this stand accommodates the notebook and adds your choice of monitor on the top shelf. The docking station helps to route the cables out of the way. Securely slide and lock the notebook into place with the help of locking guideposts.

Customize an altogether better solution with the HP B300 PC Mounting Bracket, which lets you attach your HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client directly behind select 2017 and 2018 HP EliteDisplays and HP Z Displays.Attach your HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client directly behind select 2017 and 2018 HP EliteDisplays and HP Z Displays with the HP B300 PC Mounting Bracket.

Atdec ADM-RCF Atdec Rail to pole collar attachment plate ADM-RCF

The AC-GC grommet accessory allows attachment of monitor mounts via desk grommet holes. It is compatible with grommet holes from 60mm to 80mm in diameter and supports desk surfaces from 18mm-36mm in thickness. It also allows cables up to the size power and VGA plugs to pass freely through the desecrate opening.

The ADM-RCF plate allows ADM-R horizontal mounting rails to be fitted to Atdec accessory collars, for use in a variety of different pole mounted configurations such as ceiling mounted menu boards and video walls. The 5mm thick steel plate is capable of supporting heavy loads and can be mounted to any Atdec accessory collar for use in single sided or back-to-back installs (additional ADM-RCF required).

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length

ADM-TX is part of the Atdec modular digital signage family.

For use with the 135mm, 460mm and 750mm Posts

For use with the 135mm, 460mm and 750mm Posts

For use with the 135mm, 460mm and 750mm Posts

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

Set of three Cable Manager clips.Required when ADM-CC is cut into shorter lengths.All mounting hardware included.

ATDEC Wall mount bracket for 50mm poles ADM-TW

The ADM-WF2 is a bracket designed to fix ADM-R mounting rails onto walls or poles, for the installation of video walls and other multi-screen configurations. The sturdy 5mm thick plate is designed for installations using micro-adjustment, pop-out or XL brackets from the modular range.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

Atdec Arm Channel Clamp White

The AWM-W35 is a part of the Atdec modular family. This is a wall mounting option for any AWM- arm.

350mm wall channel. Easily integrated with any SYSTEMA arms and provides approximately 168mm of vertical height adjustment.

Rotating Monitor Stand

Atdec ADM-B-V400 Atdec Mounting Bracket ADM-B-V400

Atdec ADM-JP Atdec Rail to post attachment plate ADM-JP

The ADM-AC2 50mm Accessory Collar is a core component of the modular range and is designed to attach a variety of different mounts and accessories onto...

Designed to fit ADM-R mounting rails to ADM-P support posts, the ADM-JP is a joining plate which is needed to assemble modular freestanding, mobile or bolt-down video wall solutions. The plate is fitted quickly and easily using the provided sliding nuts and countersunk screws, which allow the mounted rail to be positioned anywhere along the length of the post. A row height spacer (BT8390-SP) is also available (separately) to help position multiple rails when installing video walls, without needing to measure out the position of each ADM-JP.

ADM-TW is part of the Atdec modular digital signage family.

Masonry, timber stud wall mounting types Landscape or portrait viewing Monitor weight suspension up to 8kg 100 x 100mm VESA mounting hole options...

The AWM-FH dual plate desk clamp is a part of the Atdec modular family. It is recommended for all 750mm post solutions and other configurations with extra heavy screens. The dual plate design provides additional stability when it's required. Suitable for desks up to 68mm in thickness.

The AWM-FH dual plate desk clamp is a part of the Atdec modular family. It is recommended for all 750mm post solutions and other configurations with extra heavy screens. The dual plate design provides additional stability when it's required. Suitable for desks up to 68mm in thickness.

Height adjustable shelf for 13ELTVS6090-KIT and 13ELTVS3360-KIT

Atdec C Clamp Black