Mount Accessories

Rotating Monitor Stand

The ADM-F is a freestanding floor mounting option for ADM-P1800 vertical posts. Levelling feet are supplied and 4 " braked castors (ADM-C) are available separately for mobile video wall applications.

130mm log monitor/notebook arm. Pan, tilt and landscape to portrait rotation. Quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). VESA head can be easily replaced with the SYSTEMA SNTB (notebook tray).

130mm log monitor/notebook arm. Pan, tilt and landscape to portrait rotation. Quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). VESA head can be easily replaced with the SYSTEMA SNTB (notebook tray).

130mm log monitor/notebook arm. Pan, tilt and landscape to portrait rotation. Quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). VESA head can be easily replaced with the SYSTEMA SNTB (notebook tray).

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

The AWM-P13 is a part of the Atdec modular family. This is the shortest post of the 3 available options (400mm and 750mm) . It's used exclusively with the dynamic arms. Up to four arms can be installed on one post.

Atdec ADM-R2000 Atdec 2000mm Wall Mounting Rail ADM-R2000

The AWM-W35 is a part of the Atdec modular family. This is a wall mounting option for any AWM- arm.

400mm high post that can support up to 4 arms. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

400mm high post that can support up to 4 arms. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

460mm long monitor/notebook arm. Three articulation points assist with mounting larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

460mm long monitor/notebook arm. Three articulation points assist with mounting larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 12kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

Atdec 460mm Monitor Arm White

710mm long monitor/notebook arm. Three articulation points and extra arm length assists with larger displays or greater cockpit angles. Pan, tilt and landscape to portrait rotation are included with a quick release display mechanism for easy attachment/removal. Supports displays up to 8kg with VESA 75 x 75, 100 x 100 (200 x 100 via additional plate). Advanced cable management. VESA head can be easily replaced with the SYSTEMA SNBT (notebook tray).

The AWM-A71 monitor arm is a part of the Atdec modular family. The arm is typically used in set & forget multi-display configurations or when the extra long focal distance adjustment is required. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

Atdec 710mm Monitor Arm White

Atdec AWM-P75G-B Atdec 750mm post AWM-P75G-B

The AWM-P75G is a part of the Atdec modular family. This post is typically used when mounting displays in two rows or when extra height is required for single, dual or triple configurations. To make the display alignment easier the post features guide marks which serve as a reference for setting the height of each arm. This is particularly useful in projects with multiple installations.

750mm high post that can support up to two rows of displays. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

750mm high post that can support up to two rows of displays. Bolt through and Desk Clamp mounting options compatible. Advanced cable management.

The AC-AP-2020 adaptor plate is designed for monitors with VESA mounting hole configurations larger than the common 50 x 50mm, 75 x 75mm or 100 x 100mm. It enables a monitor with a mounting hole pattern up to 200x200 VESA mounting hole pattern to be attached to mounts with smaller VESA patterns. Suitable for screens with VESA hole patterns of 50x50, 75x75, 100x100, 100x150, 120x180, 200x100, and 200x200. Fasteners supplied.

Set of three Cable Manager clips.Required when ADM-CC is cut into shorter lengths.All mounting hardware included.

Designed to fit ADM-R mounting rails to ADM-P support posts, the ADM-JP is a joining plate which is needed to assemble modular freestanding, mobile or bolt-down video wall solutions. The plate is fitted quickly and easily using the provided sliding nuts and countersunk screws, which allow the mounted rail to be positioned anywhere along the length of the post. A row height spacer (BT8390-SP) is also available (separately) to help position multiple rails when installing video walls, without needing to measure out the position of each ADM-JP.

ADM-R1750 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R1750 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs

The ADM-R500 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R500 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

ADM-R700 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R700 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length.

The ADM-WF2 is a bracket designed to fix ADM-R mounting rails onto walls or poles, for the installation of video walls and other multi-screen configurations. The sturdy 5mm thick plate is designed for installations using micro-adjustment, pop-out or XL brackets from the modular range.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

The AWM-LC is a part of the Atdec modular family. The clamp is used exclusively with the AWM-DB dynamic arm enabling its attachment to the AWM- posts and wall channels.

Atdec Arm Channel Clamp White

The AWMS-2-4640 is a dual 460mm arm combination attached to a 400mm post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminium, the mount can be easily recycled at the end of its life.

Atdec AWMS-4640F-B Atdec AWM Single monitor arm solution AWMS-4640F-B

For use with the 135mm, 460mm and 750mm Posts

The AWM-FB bolt through mounting option is a part of the Atdec modular family. It offers flexibility in mounting position and when attachment to the edge of the desk is not possible. Suitable for desks up to 33mm.

Atdec C Clamp Black

Atdec TH-TVCB-CM Atdec Camera Shelf for TH-TVCB Mobile Cart (TH-TVCB-CM)

The AWM-LR dual display crossbar accessory is part of the Atdec AWM modular mounting family. This cost-effective solution allows mounting two displays on a single monitor arm. It features a convenient ergonomic handle (included) for effortless re-positioning of both displays simultaneously. Recommended for use with Atdec's AWM-AHX heavy duty dynamic Arm. Compatible with the following AWM monitor arms: AWM-A13, AWM-A46, and AWM-A71. Can be also attached directly to post using the AWM-LC clamp.

The AWM-AD monitor arm is a mounting component in the AWM modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted.For direct to desk mounting use AWM-LB base (sold separately). For post configurations use AWM-LC clamp (sold separately).

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

The AWM-AD monitor arm is a part of the Atdec modular family. The spring-assisted arm is typically used in applications where the position of the display is frequently adjusted. Ideal for activity-based and agile workplaces. VESA head can be replaced with the SNTB notebook tray accessory (sold separately).

For use with the 135mm, 460mm and 750mm Posts

For use with the 135mm, 460mm and 750mm Posts

For use with the 135mm, 460mm and 750mm Posts

Atdec TH-2250-VF Atdec Fixed angle Screen mount TH-2250-VF

The AC-GC grommet accessory allows attachment of monitor mounts via desk grommet holes. It is compatible with grommet holes from 60mm to 80mm in diameter and supports desk surfaces from 18mm-36mm in thickness. It also allows cables up to the size power and VGA plugs to pass freely through the desecrate opening.

The AWM-FH dual plate desk clamp is a part of the Atdec modular family. It is recommended for all 750mm post solutions and other configurations with extra heavy screens. The dual plate design provides additional stability when it's required. Suitable for desks up to 68mm in thickness.

The AWM-FH dual plate desk clamp is a part of the Atdec modular family. It is recommended for all 750mm post solutions and other configurations with extra heavy screens. The dual plate design provides additional stability when it's required. Suitable for desks up to 68mm in thickness.

Atdec AWM-LTH-B Atdec Heavy Duty Tilt Head AWM-LTH-B

Atdec AWM-LTH-S Atdec Heavy Duty Tilt Head AWM-LTH-S

The AWM-LTH heavy duty VESA tilt head accessory is part of the Atdec AWM modular mounting family. It's designed to support weights up to 18kg. Compatible with the following AWM components: AWM-A46, AWM-A71, AWM-AHX, and AWM-LC.

The AWM-LTH heavy duty VESA tilt head accessory is part of the Atdec AWM modular mounting family. It's designed to support weights up to 18kg. Compatible with the following AWM components: AWM-A46, AWM-A71, AWM-AHX, and AWM-LC.

Atdec TH-TVS Atdec Media shelf accessory TH-TVS

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

The AWM-LB is a part of the Atdec modular family. This desk base is used exclusively with the AWM-DB dynamic arm for a single monitor desk mounting configuration.

Atdec ADM-B-V400 Atdec Mounting Bracket ADM-B-V400

Atdec SP40S Atdec Mounting Post SP40S

The ADM-RCF plate allows ADM-R horizontal mounting rails to be fitted to Atdec accessory collars, for use in a variety of different pole mounted configurations such as ceiling mounted menu boards and video walls. The 5mm thick steel plate is capable of supporting heavy loads and can be mounted to any Atdec accessory collar for use in single sided or back-to-back installs (additional ADM-RCF required).

Atdec ADM-P1800 Atdec Post 180mm ADM-P1800

The SMHS VESA display replacement head is a part of the Atdec modular family.

Atdec VESA Head Silver Quick release VESA head 75x75 100x100

Atdec ADM-RCF Atdec Rail to pole collar attachment plate ADM-RCF

Atdec ADM-JP Atdec Rail to post attachment plate ADM-JP

The Telehook TH-1040-CT-B2B is an accessory kit that enables attachment of the second screen to the TH-1040-CTS and TH-1040-CTL ceiling mounts in a dual back-to-back configuration.

The TH-TVCB-CM is a camera shelf accessory for the TH-TVCB mobile TV cart. It allows a professional grade teleconferencing camera to be securely positioned above your existing mobile cart. It helps to improve your teleconferencing experience by tidying up your excess cabling, offering a high range of movement and creating an all in one teleconferencing system. It features a high range of movement at all three pivot points, integrated cable management and 10 years warranty.

The Telehook TH-VWV is a bracket set (2 brackets per set) for use with the Telehook Universal Video Wall Mount. It is compatible with a universal range of video panels thanks to its unlimited width VESA mounting hole pattern (200mm to 400mm high). A complete solution can be configured via the use of a combination of 100cm (TH-VWP-100) or 160cm (TH-VWP-160) wall plates and additional bracket sets as required. The Telehook Universal Video Wall Mounting System is an industry leading modular, interchangeable and upgradeable product range that supports a wide variety of video wall configurations; from a modest 2x2 configuration all the way up to 12x12 and beyond.

The Telehook TH-VWP-160 is a 160cm wall plate for use with the Telehook Universal Video Wall Mount. A complete solution can be configured via the use of a combination of bracket sets (TH-VWV), 100cm (TH-VWP-100) wall plates and 160cm (TH-VWP-160) wall plates. The Telehook Universal Video Wall Mounting System is an industry leading modular, interchangeable and upgradeable product range that supports a wide variety of video wall configurations; from a modest 2x2 configuration all the way up to 12x12 and beyond. It incorporates a range of high end features that offer high security, time saving and easy installation, and clever adjustment options.

Telehook Universal Video Wall Plate - range 50cm, 80cm, 100cm & 160cm (codes listed) for use with the Telehook Universal Video Wall Rails. This wall plate can be combined with TH-VWV or TH-VWVP rails & other plates to create virtually limitless video wall configurations in either landscape or portrait configurations.

Telehook Universal Video Wall Plate - range 50cm, 80cm, 100cm & 160cm (codes listed) for use with the Telehook Universal Video Wall Rails. This wall plate can be combined with TH-VWV or TH-VWVP rails & other plates to create virtually limitless video wall configurations in either landscape or portrait configurations.

Atdec ADM-BV400T Atdec VESA 400 tilting brackets (set of two) ADM-BV400T

Atdec VESA Head Black

60mm wall channel.

The AWM-W6 is a part of the Atdec modular family. This is a wall mounting option for any AWM- arm.

Height adjustable shelf for 13ELTVS6090-KIT and 13ELTVS3360-KIT

Gilkon FP7 Extenstion Bracket Set of 2 Arms, Upgrades VESA 400m to 600mm for the Gilkon FP7 Range

The Havis Heavy Duty Mount is a rugged, professional grade computermount that combines the perfect balance of strength, safety, and ultrasmooth operation worthy of your most mission critical computer devices.

The Havis monitor mount system utilizes interchangeable parts to mount your monitor and keyboard to any vehicle, without permanent modification. Your monitor will conveniently tilt and swivel for optimal viewing angles for both driver and passenger. Designed to fit Motorola, L3, Data 911, Amrel, Dell, Panasonic, and more, this system is an excellent space-saving solution that allows you to mount additional equipment in a console.

Customize an altogether better solution with the HP B300 PC Mounting Bracket, which lets you attach your HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client directly behind select 2017 and 2018 HP EliteDisplays and HP Z Displays.Attach your HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client directly behind select 2017 and 2018 HP EliteDisplays and HP Z Displays with the HP B300 PC Mounting Bracket.

Wrap your HP Desktop Mini PC in the HP Desktop Mini Security/Dual VESA Sleeve v3 to securely mount it with or without an Expansion Module behind your display, position the solution on a wall, and lock it down with the integrated security bracket and optional HP Ultra-Slim Cable Lock.