Mount Accessories

The AC-AP-2020 adaptor plate is designed for monitors with VESA mounting hole configurations larger than the common 50 x 50mm, 75 x 75mm or 100 x 100mm. It enables a monitor with a mounting hole pattern up to 200x200 VESA mounting hole pattern to be attached to mounts with smaller VESA patterns. Suitable for screens with VESA hole patterns of 50x50, 75x75, 100x100, 100x150, 120x180, 200x100, and 200x200. Fasteners supplied.

The AC-GC grommet accessory allows attachment of monitor mounts via desk grommet holes. It is compatible with grommet holes from 60mm to 80mm in diameter and supports desk surfaces from 18mm-36mm in thickness. It also allows cables up to the size power and VGA plugs to pass freely through the desecrate opening.

Set of three Cable Manager clips.Required when ADM-CC is cut into shorter lengths.All mounting hardware included.

The ADM-F is a freestanding floor mounting option for ADM-P1800 vertical posts. Levelling feet are supplied and 4 " braked castors (ADM-C) are available separately for mobile video wall applications.

Designed to fit ADM-R mounting rails to ADM-P support posts, the ADM-JP is a joining plate which is needed to assemble modular freestanding, mobile or bolt-down video wall solutions. The plate is fitted quickly and easily using the provided sliding nuts and countersunk screws, which allow the mounted rail to be positioned anywhere along the length of the post. A row height spacer (BT8390-SP) is also available (separately) to help position multiple rails when installing video walls, without needing to measure out the position of each ADM-JP.

ADM-R1750 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R1750 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs

The ADM-R500 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R500 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

ADM-R700 horizontal mounting rails are the central component of any modular installation, whether it be for a complex multi-screen install or a single screen application. Made from aluminium, the rail itself is sturdy yet lightweight and is designed to support a variety of brackets and mounts, allowing screens and other AV equipment to be fitted to the rail. Available in a range of lengths, the ADM-R700 can be mounted onto walls, poles or modular support posts using a range of different fixing kits (available separately). Rails can be joined together using extension kits (also available separately) for much longer installs.

The ADM-RCF plate allows ADM-R horizontal mounting rails to be fitted to Atdec accessory collars, for use in a variety of different pole mounted configurations such as ceiling mounted menu boards and video walls. The 5mm thick steel plate is capable of supporting heavy loads and can be mounted to any Atdec accessory collar for use in single sided or back-to-back installs (additional ADM-RCF required).

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length

Atdec 50mm diameter steel poles allow professionals to tailor custom mounting solutions to their exact requirements. Available in 1m, 2m and 3m lengths the poles feature safety bolt holes at top and bottom for secure installation and are internally unobstructed to allow cables to pass through easily (safety bolts are included). Poles can be linked together using ADM-TX joiners or cut to required length.